|
MS Models: Cold Fire Super Systems MS Models were designed for on-board manual fire Suppression systems for vehicles. The cylinder can be mounted in the cab or at a remote location up to 6' away from the operator. Two aluminum discharge tubes and up to 6 nozzles pointed at predetermined areas can be istalled depending on the cylinder volume. There are two types of MS activation The push handle which is mounted on the top of the cylinder contains a pin and rupture disk. 
Drawings: The pull method which uses a pull handle attached to a 6' cable to release the spring loaded pin and rupture disk. In the event of a fire or when the operator/driver becomes aware of the fire he pulls or pushes the red handle (depending on the model installed) that immediatel releases all the ColdFire® in the cylinder. 
Cold Fire Super systems have developed a range of optional equipment for use with the MS Model. This includes a pressure switch which can be used for alarm indication, engine, or plant shut down. Cold Fire Super Systems MS Model uses ColdFire® exclusively and are available in 1, 2, 3, 4, 6, 9, and 12 Liter Stainless Steel Cylinders. Drawings: Standard Mounting: Vertical Standard: ColdFire® is rated for 32 °F Optional: ColdFire® Premix available rated for 0 °F, -25 °F, -45 °F, and -65 °F
|
